Advanced User Settings for the MotivAider

Increase or decrease the strength of the vibration

Advanced features allow you to customize the MotivAider to suit your needs

  1. With the slide switch at SET, press the oval user key once. You should feel the MotivAider vibrate.
  2. Press the UP or DOWN keys to scroll through and try out the various vibration strength settings.
  3. When the vibration strength is the way you want it, slide the switch to RUN then back to SET to save your setting. Your MotivAider will now use that setting until you change it.
  4. When you're ready to use the MotivAider, just slide the switch to RUN.

Increase or decrease how long the vibration signal lasts

  1. With the slide switch at SET, press the oval user key twice. The number that appears on the screen refers to the number of seconds the vibration will last.
  2. Use the UP or DOWN key to scroll through the available settings (2, 3, or 4 seconds).
  3. With the setting you want on the screen, slide the switch to RUN then to SET to save your setting.
  4. Your MotivAider will now use the setting you selected until you change it.
  5. When you're ready to use the MotivAider, just slide the switch to RUN.

Send signals at variable intervals instead of at fixed (regular) intervals

Standard (grey) MotivAider

  1. With the slide switch at SET, press the oval user key three (3) times.
  2. Press the UP or DOWN key until you see AVE (average) blinking on the screen.
  3. Slide the switch to RUN then to SET to save your setting.
  4. Use the UP and DOWN keys to enter the amount of time you want to pass between signals.
  5. When you're ready to use the MotivAider, just slide the switch to RUN.

New (silver) MotivAider

  1. With the slide switch at SET, press the oval user key three (3) times.
  2. Press the UP or DOWN key until you see RAN (random) blinking on the screen.
  3. Slide the switch to RUN then to SET to save your setting.
  4. Use the UP and DOWN keys to enter the maximum amount of time you want to pass between signals.
  5. When you're ready to use the MotivAider, just slide the switch to RUN.
Get more information about using the MotivAider's Random Interval capability.

Set input units in seconds instead of minutes/hours

  1. With the slide switch at SET, zero the display by pressing the UP and DOWN keys at the same time.
  2. Press the oval user key four (4) times.
  3. Press the UP or DOWN key until you see SEC (seconds) blinking on the screen.
  4. Slide the switch to RUN then to SET to save your setting.
  5. Use the UP and DOWN keys to enter the number of seconds you want to pass between signals.
  6. When you're ready to use the MotivAider, just slide the switch to RUN.

Change what's displayed on the screen

  1. With the slide switch at SET, press the oval user key five (5) times.
  2. Press the UP or DOWN key to scroll through the available options.
    If you want your MotivAider to display nothing but a small animated graphic while it's operating, scroll until you see GR (graphic) blinking on the screen.
    If you want your MotivAider to display the time of day while it's operating, scroll until you see Cl (clock) blinking on the screen.
  3. Slide the switch to RUN then to SET to save your selected display setting.
  4. If you selected the option to display time of day,
    (a) Press the oval user key six (6) times and then use the UP and DOWN keys to select the current hour of the day.
    (b) Press the oval key one time and use the UP and DOWN keys to select the correct minutes.
    (c) Slide the switch to RUN then SET to save the time of day.
  5. When you're ready to use the MotivAider, just slide the switch to RUN.

Restore ALL factory default settings

  1. With the slide switch at SET, press the oval user key eight (8) times.
  2. Press the UP or DOWN key until you see DEF (default) blinking on the screen.
  3. Slide the switch to RUN then to SET to restore all factory default settings.

Bookmark and Share